FC Fiber Optic Pigtail

FC Fiber Optic Pigtail was one of the most popular single-mode pigtails for many years. It also uses a 2.5 mm ferrule, but some of the early ones use ceramic inside stainless steel ferrules. It screws on firmly, but you must make sure you have the key aligned in the slot properly before tightening. It's been mostly replaced by SCs and LCs. However, as a result of this characteristics for easy assemblies and installation, Our FC Fiber Optic Pigtails are every competitive.
The FC/PC pigtail incorporates a Physical Contact (PC) curved polished fiber end face that greatly reduces back-reflection over the regular FC pigtail with flat end-face ferrule.
The Telecomposer FC/PC pigtail is available in both single-mode and multimode versions, and is fully inter-mateable with NTT-FC products. Both single-mode and multimode versions come with a zirconia ceramic ferrule with pre-polished PC profile and convex spherical end. These end-face types allow for faster polishing, and low back reflection and optical loss, while ensuring maximum repeatability.
Telecomposer offers an FC Tunable Pigtail with four-position tuning for applications requiring precise fiber alignment. A specially designed FC PM Pigtail is available for use with Polarization Maintaining Fiber.
Characteristics:
Compliance with Telcordia, ANSI, IEC,TIA/EIA,
NTT and JIS specifications*
Low insertion loss & back reflection*
One-piece construction & pull-proof design
Free-floating ceramic ferrule
Precision anti-rotation key
UL-rated plastic housing and boots in
a variety of colors
Telcordia style boots
Corrosion resistant body (Nickel Plated Brass)
 Application:
Optical Fiber Communications, Video , LAN, CATV Systems
Optical Network Equipments, Optical Test Equipments
Module Pigtails, Multi-media, Premise
Active device termination installations
Parameters
Type
Parameters    Single-mode    Multimode
Pigtail Type    FC Fiber Optic Pigtail
Polishing Type    PC    UPC    APC    PC
Insertion Loss (dB)    ≤0.2    ≤0.25
Return Loss (dB)    ≥45    ≥50    ≥60    N/A
Repeatability (dB)    IL≤0.2  RL≤5    IL≤0.1
Vibration (dB)    IL≤0.2 dB  RL≤5dB    IL≤0.2 dB
Exchangeability (dB)    IL≤0.2 dB  RL≤5dB    IL≤0.2 dB
Tensile Strength    F200N
Durability    n=1000
Operation Temperature (℃)    -40℃ ～+80℃
Ferrule Material    Zirconia Ceramic
Cable Diameter (mm)    Ø0.9, Ø2.0, Ø3.0
Order Information
FC/PC Single-mode 0.9mm Fiber Optic Pigtail
FC/APC Single-mode 0.9mm Fiber Optic Pigtail
FC/PC Multi-mode 0.9mm Fiber Optic Pigtail
FC/PC Single-mode 2.0mm Fiber Optic Pigtail
FC/APC Single-mode 2.0mm Fiber Optic Pigtail
FC/PC Multi-mode 2.0mm Fiber Optic Pigtail
FC/PC Single-mode 3.0mm Fiber Optic Pigtail
FC/APC Single-mode 3.0mm Fiber Optic Pigtail
FC/PC Multi-mode 3.0mm Fiber Optic Pigtail