1*3 Single-mode Monolithic Steel Fused Fiber Optic Splitter

Fiber optic splitter, also called optical splitter, fiber optic coupler, is a device used in optical fiber systems with one or more input fibers and one or several output fibers. There are mainly two types of optical splitters. One is fused splitter (FTB), the other is Planar Light-wave Circuits (PLC Splitter).For the fused optical splitter, It can be divided into different ratios. such as 50/50 if the split is even, or 80/20 if 80% of the signal goes to one side and only 20% to the other Planar Light-wave Circuits (PLC Splitter) cannot work with different ratio rather than it provide a accurate splitting in high-density output (like 8,16,32,64 outputs) However, The most common type of fiber optic splitter splits the output evenly, which is coming out with the same output of light signals. As a result of its great function, Optical splitter is a very important part in passive optic networks (PON).
Characteristics:
Different combinations of coupling ratio
Low crosstalk & excess loss
High optical return loss
Available in dual/three wavelength operation
Optional connector termination upon request
Available in 250um & 900um fiber, 2mm or 3mm
Application:
FTTH, LAN, PON & Optical CATV
Local ring net, Optical fiber communication system
Optical fiber test equipment
Optical fiber sensor
Parameters
Parameter Single-mode Fiber Optic Splitter Type
   Configuration   NX4   N×8 N×16 NX32
Parameter    N=1,2,4             N=1,2,8 N=1,2,16 N=1,2,32
Grade Grade A
Wavelength (nm) 1310nm ,1550nm,1310&1550nm,1310&1490&1550nm
Bandwidth (nm) 13/15±40nm,1490±10nm
Max. Excess Loss 0.3dB 0.45dB 0.6dB 0.78dB
Typical IL 6.3dB 9.5dB 12.8dB 16.2dB
Max.IL 7.8dB 10.4dB 13.8dB 17.2dB
Polarization DL ≤0.2dB ≤0.3dB ≤0.4dB ≤0.5dB
Uniformity(dB) 1.2dB 1.8dB 2.4dB 3dB
Thermal Stability ≤0.2dB /℃ ≤0.3dB /℃ ≤0.4dB /℃ ≤0.5dB /℃
Directivity (dB) ≥60dB
Temperature(℃) -40℃to +85℃
Package Type 1.bare fiber                                                                                                                               2.0.9/2.0/3.0mm loose tube,                                                                                                         3.connector type: FC/APC,FC/PC,SC/APC,SC/PC, all are optional


Pigtail length 1 meter, others on request
Package 100×80×10mm 100×80×10mm 120×92×15mm 140×115×18mm
Order Information
Wavelength Package Size Ports Fiber Types Fiber Cable Connector
13=1310nm FB=bare fiber 102 0=G652D 1=250um 0=0m 1=SC/APC
14=1490nm ST=stainless 103 1=G657A 2=900mm 1=1m 2=SC/PC
15=1550nm Steel tube 104 C=customize 3=2.0mm 2=1.5m 3=FC/APC
35=1310nm PB=plastic 105 　 4=3.0mm 3=2.0m 4=FC/PC
&1550nm MB=Metal ……. 　 　 C=customize 5=ST/APC
345=1310&1490 　 196 　 　 　 6=ST/PC
&1550nm 　 203 　 　 　 7=LC/APC
　 　 204 　 　 　 8=LC/PC
　 　 205 　 　 　 9=Customize
　 　 …… 　 　 　 　
　 　 296 　 　 　 　
　 　 202 　 　 　 　
　 　 404 　 　 　 　
　 　 808 　 　 　 　
　 　 1616 　 　 　 　

Read More

1*64 PLC Fiber Optic Splitter

PLC Splitter means planar light-wave circuit splitter, which is based on planar light wave technology, widely used in FTTX,EPOM,BPON,GPON .We launched 1xN,2XN PLC splitter with consistent performance, low optical Insertion loss, low polarization dependent Loss, high reliability and stability , superior environmental and mechanical characteristics, and fast installation. They also enable more effective monitoring and management of fiber optical networks. All wavelengths (1260-1620nm) are not sensitive. And our products meet Telcordia 1209,1221 standard ,ROHS.
We have unique competitive advantages in our PLC product platform by leveraging our strong expertise in fiber array block fabrication, our partnership with foundry service providers, and our reliable packaging technologies. Our splitters are tested based on the strictest standards of the industry, and we
guarantee quality, turnaround and competitive pricing.
The PLC splitter we offer are:1x2,1x4,1x8,1x16,1x32,1x64,2x4,2x8,2x16,2x32,2x64
Characteristics:
Good uniformity and low insertion loss              
Low Polarization Dependent Loss               
Excellent Environmental Stability                 
Excellent Mechanical             
Stability Telecordia GR-1221 and GR-1209               
Components through TLC-Certified, Conform to YD1117-2001
Application:
Fiber to the point (FTTX)
Fiber to the home (FTTH)
Passive optical networks(PON)
Local area networks (LAN)
Cable television (CATV)
Test equipment
Parameters
Type    1x2    1×4    1×8    1×16    1×32    1×64
Operating wavelength（nm）    1260-1650
Insertion loss (dB)     Typical     3.6    7.2    10.5    13.5    17    19.5
    Maximum     4    7.5    11    14    17.2    21
Uniformity (dB)     Typical    0.4    0.5    0.6    1    1    2
    Maximum    0.6    0.6    0.8    1.2    1.5    2.5
Polarization Dependent Loss (dB)     Typical    0.1    0.1    0.15    0.2    0.2    0.2
    Maximum    0.15    0.15    0.25    0.3    0.3    0.3
Wavelength          dependent loss (dB)    Typical    0.1    0.1    0.15    0.3    0.3    0.3
    Maximum     0.2    0.3    0.3    0.5    0.5    0.5
Return loss (dB)     Minimum     55/50
Directivity (dB)     Minimum     55
Operating temperature (℃)     -20 to 85
Storage temperature (℃)     -40 to 85
Optical fiber type     SMF-28 Or customer required
Optical fiber length (m)     1.2 or customize
Order Information
Input Channel Number      Input Optical
Fiber Type      Output Channel Number      Output Optical
Fiber Type      Connector Type In/Out    Fiber
Length    Package
Type
1=1 channel
2=2 channel     0=250um bare fiber
1=900um loose tube
2=2.0mm cable
3=3.0mm cable    02=2 channel
04=4 channel
08=8 channel
16=16 channel
32=32 channel
64=64 channel    0=250um bare fiber
1=900um loose tube
2=2.0mm cable
3=3.0mm cable
    0=no connector
1=FC/PC
2=FC/APC
3=SC/PC
4=SC/APC
5=LC/PC
6=LC/APC
S=Specify    10=1.0 meter
15=1.5 Meter
20=2.0 Meter
30=3.0 Meter
    1=S.S Tube 1
2=S.S Tube 2
3=S.S Tube 3
4=ABS Box
5=LGX Box
6=19 Inch
Rack

Read More

1*24 PLC Fiber Optic Splitter

PLC Splitter means planar light-wave circuit splitter, which is based on planar light wave technology, widely used in FTTX,EPOM,BPON,GPON .We launched 1xN,2XN PLC splitter with consistent performance, low optical Insertion loss, low polarization dependent Loss, high reliability and stability , superior environmental and mechanical characteristics, and fast installation. They also enable more effective monitoring and management of fiber optical networks. All wavelengths (1260-1620nm) are not sensitive. And our products meet Telcordia 1209,1221 standard ,ROHS.
We have unique competitive advantages in our PLC product platform by leveraging our strong expertise in fiber array block fabrication, our partnership with foundry service providers, and our reliable packaging technologies. Our splitters are tested based on the strictest standards of the industry, and we
guarantee quality, turnaround and competitive pricing.
The PLC splitter we offer are:1x2,1x4,1x8,1x16,1x32,1x64,2x4,2x8,2x16,2x32,2x64
Characteristics:
Good uniformity and low insertion loss              
Low Polarization Dependent Loss               
Excellent Environmental Stability                 
Excellent Mechanical             
Stability Telecordia GR-1221 and GR-1209               
Components through TLC-Certified, Conform to YD1117-2001
Application:
Fiber to the point (FTTX)
Fiber to the home (FTTH)
Passive optical networks(PON)
Local area networks (LAN)
Cable television (CATV)
Test equipment
Parameters
Type    1x2    1×4    1×8    1×16    1×32    1×64
Operating wavelength（nm）    1260-1650
Insertion loss (dB)     Typical     3.6    7.2    10.5    13.5    17    19.5
    Maximum     4    7.5    11    14    17.2    21
Uniformity (dB)     Typical    0.4    0.5    0.6    1    1    2
    Maximum    0.6    0.6    0.8    1.2    1.5    2.5
Polarization Dependent Loss (dB)     Typical    0.1    0.1    0.15    0.2    0.2    0.2
    Maximum    0.15    0.15    0.25    0.3    0.3    0.3
Wavelength          dependent loss (dB)    Typical    0.1    0.1    0.15    0.3    0.3    0.3
    Maximum     0.2    0.3    0.3    0.5    0.5    0.5
Return loss (dB)     Minimum     55/50
Directivity (dB)     Minimum     55
Operating temperature (℃)     -20 to 85
Storage temperature (℃)     -40 to 85
Optical fiber type     SMF-28 Or customer required
Optical fiber length (m)     1.2 or customize
Order Information
Input Channel Number      Input Optical
Fiber Type      Output Channel Number      Output Optical
Fiber Type      Connector Type In/Out    Fiber
Length    Package
Type
1=1 channel
2=2 channel     0=250um bare fiber
1=900um loose tube
2=2.0mm cable
3=3.0mm cable    02=2 channel
04=4 channel
08=8 channel
16=16 channel
32=32 channel
64=64 channel    0=250um bare fiber
1=900um loose tube
2=2.0mm cable
3=3.0mm cable
    0=no connector
1=FC/PC
2=FC/APC
3=SC/PC
4=SC/APC
5=LC/PC
6=LC/APC
S=Specify    10=1.0 meter
15=1.5 Meter
20=2.0 Meter
30=3.0 Meter
    1=S.S Tube 1
2=S.S Tube 2
3=S.S Tube 3
4=ABS Box
5=LGX Box
6=19 Inch
Rack

Read More

1*32 PLC Fiber Optic Splitter

PLC Splitter means planar light-wave circuit splitter, which is based on planar light wave technology, widely used in FTTX,EPOM,BPON,GPON .We launched 1xN,2XN PLC splitter with consistent performance, low optical Insertion loss, low polarization dependent Loss, high reliability and stability , superior environmental and mechanical characteristics, and fast installation. They also enable more effective monitoring and management of fiber optical networks. All wavelengths (1260-1620nm) are not sensitive. And our products meet Telcordia 1209,1221 standard ,ROHS.
We have unique competitive advantages in our PLC product platform by leveraging our strong expertise in fiber array block fabrication, our partnership with foundry service providers, and our reliable packaging technologies. Our splitters are tested based on the strictest standards of the industry, and we
guarantee quality, turnaround and competitive pricing.
The PLC splitter we offer are:1x2,1x4,1x8,1x16,1x32,1x64,2x4,2x8,2x16,2x32,2x64
Characteristics:
Good uniformity and low insertion loss              
Low Polarization Dependent Loss               
Excellent Environmental Stability                 
Excellent Mechanical             
Stability Telecordia GR-1221 and GR-1209               
Components through TLC-Certified, Conform to YD1117-2001
Application:
Fiber to the point (FTTX)
Fiber to the home (FTTH)
Passive optical networks(PON)
Local area networks (LAN)
Cable television (CATV)
Test equipment
Parameters
Type    1x2    1×4    1×8    1×16    1×32    1×64
Operating wavelength（nm）    1260-1650
Insertion loss (dB)     Typical     3.6    7.2    10.5    13.5    17    19.5
    Maximum     4    7.5    11    14    17.2    21
Uniformity (dB)     Typical    0.4    0.5    0.6    1    1    2
    Maximum    0.6    0.6    0.8    1.2    1.5    2.5
Polarization Dependent Loss (dB)     Typical    0.1    0.1    0.15    0.2    0.2    0.2
    Maximum    0.15    0.15    0.25    0.3    0.3    0.3
Wavelength          dependent loss (dB)    Typical    0.1    0.1    0.15    0.3    0.3    0.3
    Maximum     0.2    0.3    0.3    0.5    0.5    0.5
Return loss (dB)     Minimum     55/50
Directivity (dB)     Minimum     55
Operating temperature (℃)     -20 to 85
Storage temperature (℃)     -40 to 85
Optical fiber type     SMF-28 Or customer required
Optical fiber length (m)     1.2 or customize
Order Information
Input Channel Number      Input Optical
Fiber Type      Output Channel Number      Output Optical
Fiber Type      Connector Type In/Out    Fiber
Length    Package
Type
1=1 channel
2=2 channel     0=250um bare fiber
1=900um loose tube
2=2.0mm cable
3=3.0mm cable    02=2 channel
04=4 channel
08=8 channel
16=16 channel
32=32 channel
64=64 channel    0=250um bare fiber
1=900um loose tube
2=2.0mm cable
3=3.0mm cable
    0=no connector
1=FC/PC
2=FC/APC
3=SC/PC
4=SC/APC
5=LC/PC
6=LC/APC
S=Specify    10=1.0 meter
15=1.5 Meter
20=2.0 Meter
30=3.0 Meter
    1=S.S Tube 1
2=S.S Tube 2
3=S.S Tube 3
4=ABS Box
5=LGX Box
6=19 Inch
Rack

Read More

1*16 PLC Fiber Optic Splitter

PLC Splitter means planar light-wave circuit splitter, which is based on planar light wave technology, widely used in FTTX,EPOM,BPON,GPON .We launched 1xN,2XN PLC splitter with consistent performance, low optical Insertion loss, low polarization dependent Loss, high reliability and stability , superior environmental and mechanical characteristics, and fast installation. They also enable more effective monitoring and management of fiber optical networks. All wavelengths (1260-1620nm) are not sensitive. And our products meet Telcordia 1209,1221 standard ,ROHS.
We have unique competitive advantages in our PLC product platform by leveraging our strong expertise in fiber array block fabrication, our partnership with foundry service providers, and our reliable packaging technologies. Our splitters are tested based on the strictest standards of the industry, and we
guarantee quality, turnaround and competitive pricing.
The PLC splitter we offer are:1x2,1x4,1x8,1x16,1x32,1x64,2x4,2x8,2x16,2x32,2x64
Characteristics:
Good uniformity and low insertion loss              
Low Polarization Dependent Loss               
Excellent Environmental Stability                 
Excellent Mechanical             
Stability Telecordia GR-1221 and GR-1209               
Components through TLC-Certified, Conform to YD1117-2001
Application:
Fiber to the point (FTTX)
Fiber to the home (FTTH)
Passive optical networks(PON)
Local area networks (LAN)
Cable television (CATV)
Test equipment
Parameters
Type    1x2    1×4    1×8    1×16    1×32    1×64
Operating wavelength（nm）    1260-1650
Insertion loss (dB)     Typical     3.6    7.2    10.5    13.5    17    19.5
    Maximum     4    7.5    11    14    17.2    21
Uniformity (dB)     Typical    0.4    0.5    0.6    1    1    2
    Maximum    0.6    0.6    0.8    1.2    1.5    2.5
Polarization Dependent Loss (dB)     Typical    0.1    0.1    0.15    0.2    0.2    0.2
    Maximum    0.15    0.15    0.25    0.3    0.3    0.3
Wavelength          dependent loss (dB)    Typical    0.1    0.1    0.15    0.3    0.3    0.3
    Maximum     0.2    0.3    0.3    0.5    0.5    0.5
Return loss (dB)     Minimum     55/50
Directivity (dB)     Minimum     55
Operating temperature (℃)     -20 to 85
Storage temperature (℃)     -40 to 85
Optical fiber type     SMF-28 Or customer required
Optical fiber length (m)     1.2 or customize
Order Information
Input Channel Number      Input Optical
Fiber Type      Output Channel Number      Output Optical
Fiber Type      Connector Type In/Out    Fiber
Length    Package
Type
1=1 channel
2=2 channel     0=250um bare fiber
1=900um loose tube
2=2.0mm cable
3=3.0mm cable    02=2 channel
04=4 channel
08=8 channel
16=16 channel
32=32 channel
64=64 channel    0=250um bare fiber
1=900um loose tube
2=2.0mm cable
3=3.0mm cable
    0=no connector
1=FC/PC
2=FC/APC
3=SC/PC
4=SC/APC
5=LC/PC
6=LC/APC
S=Specify    10=1.0 meter
15=1.5 Meter
20=2.0 Meter
30=3.0 Meter
    1=S.S Tube 1
2=S.S Tube 2
3=S.S Tube 3
4=ABS Box
5=LGX Box
6=19 Inch
Rack

Read More

1*8 PLC Fiber Optic Splitter

PLC Splitter means planar light-wave circuit splitter, which is based on planar light wave technology, widely used in FTTX,EPOM,BPON,GPON .We launched 1xN,2XN PLC splitter with consistent performance, low optical Insertion loss, low polarization dependent Loss, high reliability and stability , superior environmental and mechanical characteristics, and fast installation. They also enable more effective monitoring and management of fiber optical networks. All wavelengths (1260-1620nm) are not sensitive. And our products meet Telcordia 1209,1221 standard ,ROHS.
We have unique competitive advantages in our PLC product platform by leveraging our strong expertise in fiber array block fabrication, our partnership with foundry service providers, and our reliable packaging technologies. Our splitters are tested based on the strictest standards of the industry, and we
guarantee quality, turnaround and competitive pricing.
The PLC splitter we offer are:1x2,1x4,1x8,1x16,1x32,1x64,2x4,2x8,2x16,2x32,2x64
Characteristics:
Good uniformity and low insertion loss              
Low Polarization Dependent Loss               
Excellent Environmental Stability                 
Excellent Mechanical             
Stability Telecordia GR-1221 and GR-1209               
Components through TLC-Certified, Conform to YD1117-2001
Application:
Fiber to the point (FTTX)
Fiber to the home (FTTH)
Passive optical networks(PON)
Local area networks (LAN)
Cable television (CATV)
Test equipment
Parameters
Type    1x2    1×4    1×8    1×16    1×32    1×64
Operating wavelength（nm）    1260-1650
Insertion loss (dB)     Typical     3.6    7.2    10.5    13.5    17    19.5
    Maximum     4    7.5    11    14    17.2    21
Uniformity (dB)     Typical    0.4    0.5    0.6    1    1    2
    Maximum    0.6    0.6    0.8    1.2    1.5    2.5
Polarization Dependent Loss (dB)     Typical    0.1    0.1    0.15    0.2    0.2    0.2
    Maximum    0.15    0.15    0.25    0.3    0.3    0.3
Wavelength          dependent loss (dB)    Typical    0.1    0.1    0.15    0.3    0.3    0.3
    Maximum     0.2    0.3    0.3    0.5    0.5    0.5
Return loss (dB)     Minimum     55/50
Directivity (dB)     Minimum     55
Operating temperature (℃)     -20 to 85
Storage temperature (℃)     -40 to 85
Optical fiber type     SMF-28 Or customer required
Optical fiber length (m)     1.2 or customize
Order Information
Input Channel Number      Input Optical
Fiber Type      Output Channel Number      Output Optical
Fiber Type      Connector Type In/Out    Fiber
Length    Package
Type
1=1 channel
2=2 channel     0=250um bare fiber
1=900um loose tube
2=2.0mm cable
3=3.0mm cable    02=2 channel
04=4 channel
08=8 channel
16=16 channel
32=32 channel
64=64 channel    0=250um bare fiber
1=900um loose tube
2=2.0mm cable
3=3.0mm cable
    0=no connector
1=FC/PC
2=FC/APC
3=SC/PC
4=SC/APC
5=LC/PC
6=LC/APC
S=Specify    10=1.0 meter
15=1.5 Meter
20=2.0 Meter
30=3.0 Meter
    1=S.S Tube 1
2=S.S Tube 2
3=S.S Tube 3
4=ABS Box
5=LGX Box
6=19 Inch
Rack

Read More

1*4 PLC Fiber Optic Splitter

PLC Splitter means planar light-wave circuit splitter, which is based on planar light wave technology, widely used in FTTX,EPOM,BPON,GPON .We launched 1xN,2XN PLC splitter with consistent performance, low optical Insertion loss, low polarization dependent Loss, high reliability and stability , superior environmental and mechanical characteristics, and fast installation. They also enable more effective monitoring and management of fiber optical networks. All wavelengths (1260-1620nm) are not sensitive. And our products meet Telcordia 1209,1221 standard ,ROHS.
We have unique competitive advantages in our PLC product platform by leveraging our strong expertise in fiber array block fabrication, our partnership with foundry service providers, and our reliable packaging technologies. Our splitters are tested based on the strictest standards of the industry, and we
guarantee quality, turnaround and competitive pricing.
The PLC splitter we offer are:1x2,1x4,1x8,1x16,1x32,1x64,2x4,2x8,2x16,2x32,2x64
Characteristics:
Good uniformity and low insertion loss              
Low Polarization Dependent Loss               
Excellent Environmental Stability                 
Excellent Mechanical             
Stability Telecordia GR-1221 and GR-1209               
Components through TLC-Certified, Conform to YD1117-2001
Application:
Fiber to the point (FTTX)
Fiber to the home (FTTH)
Passive optical networks(PON)
Local area networks (LAN)
Cable television (CATV)
Test equipment
Parameters
Type    1x2    1×4    1×8    1×16    1×32    1×64
Operating wavelength（nm）    1260-1650
Insertion loss (dB)     Typical     3.6    7.2    10.5    13.5    17    19.5
    Maximum     4    7.5    11    14    17.2    21
Uniformity (dB)     Typical    0.4    0.5    0.6    1    1    2
    Maximum    0.6    0.6    0.8    1.2    1.5    2.5
Polarization Dependent Loss (dB)     Typical    0.1    0.1    0.15    0.2    0.2    0.2
    Maximum    0.15    0.15    0.25    0.3    0.3    0.3
Wavelength          dependent loss (dB)    Typical    0.1    0.1    0.15    0.3    0.3    0.3
    Maximum     0.2    0.3    0.3    0.5    0.5    0.5
Return loss (dB)     Minimum     55/50
Directivity (dB)     Minimum     55
Operating temperature (℃)     -20 to 85
Storage temperature (℃)     -40 to 85
Optical fiber type     SMF-28 Or customer required
Optical fiber length (m)     1.2 or customize
Order Information
Input Channel Number      Input Optical
Fiber Type      Output Channel Number      Output Optical
Fiber Type      Connector Type In/Out    Fiber
Length    Package
Type
1=1 channel
2=2 channel     0=250um bare fiber
1=900um loose tube
2=2.0mm cable
3=3.0mm cable    02=2 channel
04=4 channel
08=8 channel
16=16 channel
32=32 channel
64=64 channel    0=250um bare fiber
1=900um loose tube
2=2.0mm cable
3=3.0mm cable
    0=no connector
1=FC/PC
2=FC/APC
3=SC/PC
4=SC/APC
5=LC/PC
6=LC/APC
S=Specify    10=1.0 meter
15=1.5 Meter
20=2.0 Meter
30=3.0 Meter
    1=S.S Tube 1
2=S.S Tube 2
3=S.S Tube 3
4=ABS Box
5=LGX Box
6=19 Inch
Rack

Read More

1*2 PLC Fiber Optic Splitter

PLC Splitter means planar light-wave circuit splitter, which is based on planar light wave technology, widely used in FTTX,EPOM,BPON,GPON .We launched 1xN,2XN PLC splitter with consistent performance, low optical Insertion loss, low polarization dependent Loss, high reliability and stability , superior environmental and mechanical characteristics, and fast installation. They also enable more effective monitoring and management of fiber optical networks. All wavelengths (1260-1620nm) are not sensitive. And our products meet Telcordia 1209,1221 standard ,ROHS.
We have unique competitive advantages in our PLC product platform by leveraging our strong expertise in fiber array block fabrication, our partnership with foundry service providers, and our reliable packaging technologies. Our splitters are tested based on the strictest standards of the industry, and we
guarantee quality, turnaround and competitive pricing.
The PLC splitter we offer are:1x2,1x4,1x8,1x16,1x32,1x64,2x4,2x8,2x16,2x32,2x64
Characteristics:
Good uniformity and low insertion loss              
Low Polarization Dependent Loss               
Excellent Environmental Stability                 
Excellent Mechanical             
Stability Telecordia GR-1221 and GR-1209               
Components through TLC-Certified, Conform to YD1117-2001
Application:
Fiber to the point (FTTX)
Fiber to the home (FTTH)
Passive optical networks(PON)
Local area networks (LAN)
Cable television (CATV)
Test equipment
Parameters
Type    1x2    1×4    1×8    1×16    1×32    1×64
Operating wavelength（nm）    1260-1650
Insertion loss (dB)     Typical     3.6    7.2    10.5    13.5    17    19.5
    Maximum     4    7.5    11    14    17.2    21
Uniformity (dB)     Typical    0.4    0.5    0.6    1    1    2
    Maximum    0.6    0.6    0.8    1.2    1.5    2.5
Polarization Dependent Loss (dB)     Typical    0.1    0.1    0.15    0.2    0.2    0.2
    Maximum    0.15    0.15    0.25    0.3    0.3    0.3
Wavelength          dependent loss (dB)    Typical    0.1    0.1    0.15    0.3    0.3    0.3
    Maximum     0.2    0.3    0.3    0.5    0.5    0.5
Return loss (dB)     Minimum     55/50
Directivity (dB)     Minimum     55
Operating temperature (℃)     -20 to 85
Storage temperature (℃)     -40 to 85
Optical fiber type     SMF-28 Or customer required
Optical fiber length (m)     1.2 or customize
Order Information
Input Channel Number      Input Optical
Fiber Type      Output Channel Number      Output Optical
Fiber Type      Connector Type In/Out    Fiber
Length    Package
Type
1=1 channel
2=2 channel     0=250um bare fiber
1=900um loose tube
2=2.0mm cable
3=3.0mm cable    02=2 channel
04=4 channel
08=8 channel
16=16 channel
32=32 channel
64=64 channel    0=250um bare fiber
1=900um loose tube
2=2.0mm cable
3=3.0mm cable
    0=no connector
1=FC/PC
2=FC/APC
3=SC/PC
4=SC/APC
5=LC/PC
6=LC/APC
S=Specify    10=1.0 meter
15=1.5 Meter
20=2.0 Meter
30=3.0 Meter
    1=S.S Tube 1
2=S.S Tube 2
3=S.S Tube 3
4=ABS Box
5=LGX Box
6=19 Inch
Rack

Read More

1*4 Single-mode ABS Module Type Fused Fiber Optic Splitter

Fiber optic splitter, also called optical splitter, fiber optic coupler, is a device used in optical fiber systems with one or more input fibers and one or several output fibers. There are mainly two types of optical splitters. One is fused splitter (FTB), the other is Planar Light-wave Circuits (PLC Splitter).For the fused optical splitter, It can be divided into different ratios. such as 50/50 if the split is even, or 80/20 if 80% of the signal goes to one side and only 20% to the other Planar Light-wave Circuits (PLC Splitter) cannot work with different ratio rather than it provide a accurate splitting in high-density output (like 8,16,32,64 outputs) However, The most common type of fiber optic splitter splits the output evenly, which is coming out with the same output of light signals. As a result of its great function, Optical splitter is a very important part in passive optic networks (PON).
Characteristics:
Different combinations of coupling ratio
Low crosstalk & excess loss
High optical return loss
Available in dual/three wavelength operation
Optional connector termination upon request
Available in 250um & 900um fiber, 2mm or 3mm
Application:
FTTH, LAN, PON & Optical CATV
Local ring net, Optical fiber communication system
Optical fiber test equipment
Optical fiber sensor
Parameters
Parameter    Single-mode Fiber Optic Splitter Type
   Configuration      NX4       N×8     N×16    NX32
Parameter        N=1,2,4                 N=1,2,8    N=1,2,16    N=1,2,32
Grade     Grade A
Wavelength (nm)    1310nm ,1550nm,1310&1550nm,1310&1490&1550nm
Bandwidth (nm)    13/15±40nm,1490±10nm
Max. Excess Loss     0.3dB    0.45dB    0.6dB    0.78dB
Typical IL    6.3dB    9.5dB    12.8dB    16.2dB
Max.IL    7.8dB    10.4dB    13.8dB    17.2dB
Polarization DL    ≤0.2dB    ≤0.3dB    ≤0.4dB    ≤0.5dB
Uniformity(dB)    1.2dB    1.8dB    2.4dB    3dB
Thermal Stability    ≤0.2dB /℃    ≤0.3dB /℃    ≤0.4dB /℃    ≤0.5dB /℃
Directivity (dB)    ≥60dB
Temperature(℃)    -40℃to +85℃
Package Type    1.bare fiber                                                                                                                               2.0.9/2.0/3.0mm loose tube,                                                                                                         3.connector type: FC/APC,FC/PC,SC/APC,SC/PC, all are optional
   
   
Pigtail length    1 meter, others on request
Package     100×80×10mm    100×80×10mm     120×92×15mm    140×115×18mm
Order Information
Wavelength    Package Size    Ports    Fiber Types    Fiber    Cable    Connector
13=1310nm    FB=bare fiber    102    0=G652D    1=250um    0=0m    1=SC/APC
14=1490nm    ST=stainless    103    1=G657A    2=900mm    1=1m    2=SC/PC
15=1550nm    Steel tube    104    C=customize    3=2.0mm    2=1.5m    3=FC/APC
35=1310nm    PB=plastic    105    　    4=3.0mm    3=2.0m    4=FC/PC
&1550nm    MB=Metal    …….    　    　    C=customize    5=ST/APC
345=1310&1490    　    196    　    　    　    6=ST/PC
&1550nm    　    203    　    　    　    7=LC/APC
　    　    204    　    　    　    8=LC/PC
　    　    205    　    　    　    9=Customize
　    　    ……    　    　    　    　
　    　    296    　    　    　    　
　    　    202    　    　    　    　
　    　    404    　    　    　    　
　    　    808    　    　    　    　
　    　    1616     　 　 　 　

Read More

1*2 Single-mode ABS Module Type Fused Fiber Optic Splitter

Fiber optic splitter, also called optical splitter, fiber optic coupler, is a device used in optical fiber systems with one or more input fibers and one or several output fibers. There are mainly two types of optical splitters. One is fused splitter (FTB), the other is Planar Light-wave Circuits (PLC Splitter).For the fused optical splitter, It can be divided into different ratios. such as 50/50 if the split is even, or 80/20 if 80% of the signal goes to one side and only 20% to the other Planar Light-wave Circuits (PLC Splitter) cannot work with different ratio rather than it provide a accurate splitting in high-density output (like 8,16,32,64 outputs) However, The most common type of fiber optic splitter splits the output evenly, which is coming out with the same output of light signals. As a result of its great function, Optical splitter is a very important part in passive optic networks (PON).
Characteristics:
Different combinations of coupling ratio
Low crosstalk & excess loss
High optical return loss
Available in dual/three wavelength operation
Optional connector termination upon request
Available in 250um & 900um fiber, 2mm or 3mm
Application:
FTTH, LAN, PON & Optical CATV
Local ring net, Optical fiber communication system
Optical fiber test equipment
Optical fiber sensor
Parameters
Parameter Single-mode Fiber Optic Splitter Type
   Configuration   NX4   N×8 N×16 NX32
Parameter    N=1,2,4             N=1,2,8 N=1,2,16 N=1,2,32
Grade Grade A
Wavelength (nm) 1310nm ,1550nm,1310&1550nm,1310&1490&1550nm
Bandwidth (nm) 13/15±40nm,1490±10nm
Max. Excess Loss 0.3dB 0.45dB 0.6dB 0.78dB
Typical IL 6.3dB 9.5dB 12.8dB 16.2dB
Max.IL 7.8dB 10.4dB 13.8dB 17.2dB
Polarization DL ≤0.2dB ≤0.3dB ≤0.4dB ≤0.5dB
Uniformity(dB) 1.2dB 1.8dB 2.4dB 3dB
Thermal Stability ≤0.2dB /℃ ≤0.3dB /℃ ≤0.4dB /℃ ≤0.5dB /℃
Directivity (dB) ≥60dB
Temperature(℃) -40℃to +85℃
Package Type 1.bare fiber                                                                                                                               2.0.9/2.0/3.0mm loose tube,                                                                                                         3.connector type: FC/APC,FC/PC,SC/APC,SC/PC, all are optional


Pigtail length 1 meter, others on request
Package 100×80×10mm 100×80×10mm 120×92×15mm 140×115×18mm
Order Information
Wavelength Package Size Ports Fiber Types Fiber Cable Connector
13=1310nm FB=bare fiber 102 0=G652D 1=250um 0=0m 1=SC/APC
14=1490nm ST=stainless 103 1=G657A 2=900mm 1=1m 2=SC/PC
15=1550nm Steel tube 104 C=customize 3=2.0mm 2=1.5m 3=FC/APC
35=1310nm PB=plastic 105 　 4=3.0mm 3=2.0m 4=FC/PC
&1550nm MB=Metal ……. 　 　 C=customize 5=ST/APC
345=1310&1490 　 196 　 　 　 6=ST/PC
&1550nm 　 203 　 　 　 7=LC/APC
　 　 204 　 　 　 8=LC/PC
　 　 205 　 　 　 9=Customize
　 　 …… 　 　 　 　
　 　 296 　 　 　 　
　 　 202 　 　 　 　
　 　 404 　 　 　 　
　 　 808 　 　 　 　
　 　 1616 　 　 　 　

Read More

1* 2 Multi-mode ABS Module Type Fused Fiber Optic Splitter

Fiber optic splitter, also called optical splitter, fiber optic coupler, is a device used in optical fiber systems with one or more input fibers and one or several output fibers. There are mainly two types of optical splitters. One is fused splitter (FTB), The other is Planar Light-wave Circuits (PLC Splitter).For the fused optical splitter, It can be divided into different ratios. such as 50/50 if the split is even, or 80/20 if 80% of the signal goes to one side and only 20% to the other. Planar Light-wave Circuits (PLC Splitter) can’t work with different ratio rather than it provides a accurate splitting in high-density output (like 8,16,32,64 outputs). However, The most common type of fiber optic splitter splits the output evenly, which is coming out with the same output of light signals. As a result of its great function, Optical splitter is a very important part in passive optic networks (PON).
Characteristics:
Different combinations of coupling ratio
Low crosstalk & excess loss
High optical return loss
Available in dual/three wavelength operation
Optional connectors termination upon request
Available in 250um & 900um fiber, 2mm or 3mm
Application:
FTTH, LAN, PON & Optical CATV
Local ring net, Optical fiber communication system
Optical fiber test equipment, Optical fiber sensor
Parameters
Parameter    Grade A
Wavelength (nm)           850 or 1300nm 850&1300,others on request
Bandwidth (nm)    ±20nm
Max. Excess Loss     ≤0.8dB(0.3dB TYP)
Coupling Ratio (%)    50/50    40/60    30/70    20/80
Typ. Insertion Loss     3.3 dB    4.3/2.5 dB    5.6/1.95 dB    7.3/1.3 dB
Max. Insertion Loss     4.1 dB    5.1/3.3 dB    6.4/2.8 dB    8.1/2.1 dB
Polarization DL    0.2 dB    0.2 dB    0.3/0.2 dB    0.3/0.2 dB
Thermal Stability    ≤0.3 (dB /℃)
Directivity (dB)    ≥55 dB(≥60dB 2×2)
Temperature(℃)    -40℃to +85℃
Package Type    1.bare fiber 
2.0.9/2.0/3.0mm loose tube
3.connector type: FC/APC,FC/PC,SC/APC,SC/PC, all is optional
Pigtail length    1 meter, others on request
Package Dimensions(mm)    Φ3×54mm, 90×20×10mm, 90×20×10
Order Information
Wavelength    Package Size    Ports    Fiber Types    Fiber    Cable    Connector
13=1310nm    FB=bare fiber    102    0=G652D    1=250um    0=0m    1=SC/APC
14=1490nm    ST=stainless    103    1=G657A    2=900mm    1=1m    2=SC/PC
15=1550nm    Steel tube    104    C=customize    3=2.0mm    2=1.5m    3=FC/APC
35=1310nm    PB=plastic    105    　    4=3.0mm    3=2.0m    4=FC/PC
&1550nm    MB=Metal    …….    　    　    C=customize    5=ST/APC
345=1310&1490    　    196    　    　    　    6=ST/PC
&1550nm    　    203    　    　    　    7=LC/APC
　    　    204    　    　    　    8=LC/PC
　    　    205    　    　    　    9=Customize
　    　    ……    　    　    　    　
　    　    296    　    　    　    　
　    　    202    　    　    　    　
　    　    404    　    　    　    　
　    　    808    　    　    　    　
　    　    1616    　 　 　 　

Read More

LC Fiber Optic Patch Cord

LC fiber patch cords are small form factor fiber optic patch cord. The LC fiber patch cords resemble a small LC fiber patch cords. Lucent Technologies first developed the LC patch cord for TelCo environment uses. Hence, LC stands for Lucent Patch cords.LC fiber patch cords have been standardized as FOCIS 10 (Fiber Optic Patch cord Intermateability Standards) in EIA/TIA-604-10. The LC patch cord uses a 1.25 mm ferrule, half the dimension of the ST ferrule or a regular ceramic ferrule patch cord. The LC gives excellent performance and is greatly preferred for single mode transmission.
The Telecomposer LC Unibody is fully compatible with the original LC family of single-mode and multimode patch cords, adapters and associated components, manufactured under a worldwide license from OFS Fitel. The Unibody features a compact, pull-proof design with RJ-45 style interface, and features a one-piece molded housing with internal strength member, for significantly improved 90º side-pull performance under Telcordia GR-326-CORE testing. It is manufactured using a ruggedized material that results in a latch trigger up to four times stronger than average.

The LC Unibody Series includes an optional anti-snag collar that prevents accidental tear and damage in high density networks. The collar comes in either simplex or duplex configurations, and can be used on the same patch cord body, eliminating the need to purchase different housing styles. The series includes a jumper patch cord designed for 2.0mm cordage, and a Behind the Wall (BTW) version for 900µm buffered fiber. The Unibody can be used for single-mode and multimode applications with either a PC or APC end-face. Plastic housing and boot made from UL rated materials are also available. The series is compliant with Telcordia GR-326-CORE, IEC 61754-20, and TIA/EIA 604-10 standards, and meets independent testing criteria from OFS Fitel.
Characteristics:
Compact, pull-proof design, with RJ-45 style interface
Fully compatible with standard LC products
Optional anti-snag simplex collar and duplex clip
Patch cord body can be used for both simplex and duplex configurations
Average insertion loss: 0.06 dB
Average return loss: 55 dB
Plastic housing and boot made from UL-rated materials
 Application:
Telecom / Datacom, LANs, CATV
Fiber to the Home, Premises Distribution
Gigabit Applications (Ethernet, ATM, SONET, etc.)
 Parameters
Type
Parameters    Single-mode    Multimode
Patch cord Type    LC Fiber Optic Patch Cord
Polishing Type    PC    UPC    APC    PC
Insertion Loss (dB)    ≤0.2    ≤0.25
Return Loss (dB)    ≥45    ≥50    ≥60    N/A
Repeatability (dB)    IL≤0.2  RL≤5    IL≤0.1
Vibration (dB)    IL≤0.2 dB  RL≤5dB    IL≤0.2 dB
Exchangeability (dB)    IL≤0.2 dB  RL≤5dB    IL≤0.2 dB
Tensile Strength    F200N
Durability    n=1000
Operation Temperature (℃)    -40℃ ～+80℃
Ferrule Material    Zirconia Ceramic
Cable Diameter (mm)    Ø0.9, Ø2.0, Ø3.0
Order Information
LC/PC Single-mode 0.9mm Fiber Optic Patch Cord
LC/APC Single-mode 0.9mm Fiber Optic Patch Cord
LC/PC Multi-mode 0.9mm Fiber Optic Patch Cord
LC/PC Single-mode 2.0mm Fiber Optic Patch Cord
LC/APC Single-mode 2.0mm Fiber Optic Patch Cord
LC/PC Multi-mode 2.0mm Fiber Optic Patch Cord
LC/PC Single-mode 3.0mm Fiber Optic Patch Cord
LC/APC Single-mode 3.0mm Fiber Optic Patch Cord
LC/PC Multi-mode 3.0mm Fiber Optic Patch Cord

Read More

FC Fiber Optic Patch Cord

FC Fiber Optic Patch cord was one of the most popular single-mode patch cords for many years. It also uses a 2.5 mm ferrule, but some of the early ones use ceramic inside stainless steel ferrules. It screws on firmly, but you must make sure you have the key aligned in the slot properly before tightening. It's been mostly replaced by SCs and LCs. However, as a result of this characteristics for easy assemblies and installation, Our FC Fiber Optic Patch cords are every competitive.
The FC/PC patch cord incorporates a Physical Contact (PC) curved polished fiber end face that greatly reduces back-reflection over the regular FC patch cord with flat end-face ferrule.
The Telecomposer FC/PC patch cord is available in both single-mode and multimode versions, and is fully inter-mateable with NTT-FC products. Both single-mode and multimode versions come with a zirconia ceramic ferrule with pre-polished PC profile and convex spherical end. These end-face types allow for faster polishing, and low back reflection and optical loss, while ensuring maximum repeatability.
Telecomposer offers an FC Tunable Patch cord with four-position tuning for applications requiring precise fiber alignment. A specially designed FC PM Patch cord is available for use with Polarization Maintaining Fiber.
Characteristics:
Compliance with Telcordia, ANSI, IEC,TIA/EIA,
NTT and JIS specifications*
Low insertion loss & back reflection*
One-piece construction & pull-proof design
Free-floating ceramic ferrule
Precision anti-rotation key
UL-rated plastic housing and boots in
a variety of colors
Telcordia style boots
Corrosion resistant body (Nickel Plated Brass)
 Application:
Optical Fiber Communications, Video , LAN, CATV Systems
Optical Network Equipments, Optical Test Equipments
Module Pigtails, Multi-media, Premise
Active device termination installations
Parameters
Type
Parameters    Single-mode    Multimode
Patch cord Type    FC Fiber Optic Patch Cord
Polishing Type    PC    UPC    APC    PC
Insertion Loss (dB)    ≤0.2    ≤0.25
Return Loss (dB)    ≥45    ≥50    ≥60    N/A
Repeatability (dB)    IL≤0.2  RL≤5    IL≤0.1
Vibration (dB)    IL≤0.2 dB  RL≤5dB    IL≤0.2 dB
Exchangeability (dB)    IL≤0.2 dB  RL≤5dB    IL≤0.2 dB
Tensile Strength    F200N
Durability    n=1000
Operation Temperature (℃)    -40℃ ～+80℃
Ferrule Material    Zirconia Ceramic
Cable Diameter (mm)    Ø0.9, Ø2.0, Ø3.0
Order Information
FC/PC Single-mode 0.9mm Fiber Optic Patch Cord
FC/APC Single-mode 0.9mm Fiber Optic Patch Cord
FC/PC Multi-mode 0.9mm Fiber Optic Patch Cord
FC/PC Single-mode 2.0mm Fiber Optic Patch Cord
FC/APC Single-mode 2.0mm Fiber Optic Patch Cord
FC/PC Multi-mode 2.0mm Fiber Optic Patch Cord
FC/PC Single-mode 3.0mm Fiber Optic Patch Cord
FC/APC Single-mode 3.0mm Fiber Optic Patch Cord
FC/PC Multi-mode 3.0mm Fiber Optic Patch Cord

Read More

MU Fiber Optic Patch Cord

MU Fiber Optic Patch cord features the small form design. MU Fiber Optic Patch cord uses 1.25mm pull-proof designed ferrule. For densely installation, MU Fiber Optic Patch cord is really a good choice. NTT has developed a variety of MU Fiber Optic Patch cords. We often use MU Fiber Optic Patch cord for mu fiber patch cable and mu fiber pigtail making.
The Telecomposer family of single-mode and multimode MU patch cords and adapters are fully intermateable with NTT-MU style products, and are NTT and JIS compliant.  This small form factor patch cord is approximately half the size of the SC patch cord, and has a push-pull style design. The patch cord features a pre-assembled body and precision molded plastic housing, and a free-floating ferrule measuring 1.25mm O.D. held in place with a precision spring.
Housing and boot are made from UL-rated material. The MU-J style patch cord is the same as the regular MU patch cord, but without the outer housing, and with a very narrow, short boot for 900 micron fiber, ideal for back panel solutions and high-density situations.
Telecomposer MU Patch cords are available in pre-assembled (one-piece) versions or unassembled kits.
Characteristics:
NTT-MU hardware compatibility
NTT & JIS compliance, Compact, pull-proof design
High precision alignment, One piece construction
Tunable zirconia patch cord ferrule
Corrosion resistant body
UL-Rated plastic housing and boot
Universal Duplex Clip
Low insertion loss & back reflection

Application:
CATV, Video, Active Device Termination
Premise Installations, Telecommunication Networks
Local Area Networks (LANs), Data processing networks
Wide Area Networks (WANs), Industrial, medical & military
 Parameters
Type
Parameters    Single-mode    Multimode
Patch cord Type    MU Fiber Optic Patch Cord
Polishing Type    PC    PC
Insertion Loss (dB)    ≤0.2    ≤0.25
Return Loss (dB)    ≥45    N/A
Repeatability (dB)    IL≤0.2  RL≤5    IL≤0.1
Vibration (dB)    IL≤0.2 dB  RL≤5dB    IL≤0.2 dB
Exchangeability (dB)    IL≤0.2 dB  RL≤5dB    IL≤0.2 dB
Tensile Strength    F200N
Durability    n=1000
Operation Temperature (℃)    -40℃ ～+80℃
Ferrule Material    Zirconia Ceramic
Order Information
MU/PC Single-mode 2.0mm Fiber Optic Patch Cord
MU/PC Multi-mode 2.0mm Fiber Optic Patch Cord

Read More

MTRJ Fiber Optic Patch Cord

MTRJ fiber optic patch cord is a duplex fiber optic patch cord with both fibers in a single polymer ferrule. It uses pins for alignment and has male and female versions. Multimode only, field terminated only by prepolished/splice method.MTRJ fiber optic patch cord is a difficult fiber optic patch cord to test, as most test sets do not allow direct adaptation to the patch cord.MTRJ fiber optic patch cord is a type of fiber optic cable that has an endpoint similar to the RJ-45 patch cord endpoint found in Ethernet connections. MTRJ patch cords are designed to snap into the Ethernet port of a computer, modem, or wireless router and provide that computer or network with extremely fast data transfer rates. MTRJ fiber optic patch cord are usually designed for multi-mode optical fibers but can be used for single mode optical fibers as well. MTRJ fiber optic patch cord are approximately 2.45 mm x 4.4 mm in size and are standardized by the International Electrotechnical Commission.We have good experience in MTRJ fiber optic patch cord testing when making MTRJ patch cords or MTRJ pigtails.

The singlemode or multimode MT-RJ products available from Telecomposer are used in two fiber applications and are well suited for high density applications. The MT-RJ patch cords utilize precision molded MT ferrules pioneered by NTT, together with precision metal guide pins and precise housing dimensions to ensure fiber alignment when mating. The MT-RJ is reliable and simple to terminate.

The MT-RJ Adapter comes standard in black, with additional colors available upon request. An optional MT-RJ Adapter with SC style housing is also available for applications where SC footprint is required.
Characteristics:
Precision molded MT ferrule
High precision guide pins for exact alignment
Duplex ferrule
Plug-jack (RJ-45) design
TIA/EIA 568-A Compliant*
Polishing does not require diamond film
.
Application:
Asynchronous Transmission Mode (ATM)
Gigabit Ethernet, CATV, Video and Multimedia
Active Device/Transceiver Interface
Premise Installations, Telecommunication Networks
Industrial, Military
Parallel optical interconnect between PC Cards and patch panels
Interconnection for O/E modules
Optical Switch inter-frame connections

Parameters
Type
Parameters    Single-mode    Multimode
Patch cord Type    MTRJ Fiber Optic Patch Cord
Polishing Type    PC    PC
Insertion Loss (dB)    ≤0.5    ≤0.3
Return Loss (dB)    ≥45    N/A
Tensile Strength    F200N
Durability (0.1dB)    n=200
Operation Temperature (℃)    -40℃ ～+85℃
Order Information
MTRJ Single-mode Fiber Optic Patch Cord
MTRJ Multi-mode Fiber Optic Patch Cord

Read More

ST Fiber Optic Patch Cord

ST fiber patch cord is still the most popular patch cord, this fiber patch cord has a bayonet mount and a long cylindrical 2.5 mm ceramic (usually) or polymer ferrule to hold the fiber. Clearly speaking, The ST fiber patch cord (Straight Tip) is a fiber patch cord which uses a plug and socket which is locked in place with a half-twist bayonet lock. The ST patch cord was the first defactor standard for fiber optic cabling and ST fiber patch cord is one of the leading fiber patch cords.
The Telecomposer ST patch cord has a bayonet-style housing and a long spring-loaded ferrule hold the fiber. They are available in both multimode or singlemode versions. Horizontally mounted simplex and duplex adapters are available with metal or plastic housing, with a choice of phosphor bronze or zirconia split sleeve. Telecomposer also offers the epoxy-free ST XPFit patch cord for quick field termination. The ST is one of the older generations of patch cord, but is still widely used for multimode networks, including LANs for buildings and campuses.
Characteristics:
Bayonet style housing for easy termination
Epoxy and epoxy-less versions
High precision alignment
Low insertion and return loss and back reflection
 Application:
Optical Fiber Communications, Video, LAN, CATV Systems
Optical Network Equipments, Optical Test Equipments
Module Pigtails, Multi-media, Premise
Active device termination installations
Parameters
Type
Parameters    Single-mode    Multimode
Patch cord Type    ST Fiber Optic Patch Cord
Polishing Type    PC    UPC    APC    PC
Insertion Loss (dB)    ≤0.2    ≤0.25
Return Loss (dB)    ≥45    ≥50    ≥60    N/A
Repeatability (dB)    IL≤0.2  RL≤5    IL≤0.1
Vibration (dB)    IL≤0.2 dB  RL≤5dB    IL≤0.2 dB
Exchangeability (dB)    IL≤0.2 dB  RL≤5dB    IL≤0.2 dB
Tensile Strength    F200N
Durability    n=1000
Operation Temperature (℃)    -40℃ ～+80℃
Ferrule Material    Zirconia Ceramic
Cable Diameter (mm)    Ø0.9, Ø2.0, Ø3.0
Order Information
ST/PC Single-mode 0.9mm Fiber Optic Patch Cord
ST/APC Single-mode 0.9mm Fiber Optic Patch Cord
ST/PC Multi-mode 0.9mm Fiber Optic Patch Cord
ST/PC Single-mode 2.0mm Fiber Optic Patch Cord
ST/APC Single-mode 2.0mm Fiber Optic Patch Cord
ST/PC Multi-mode 2.0mm Fiber Optic Patch Cord
ST/PC Single-mode 3.0mm Fiber Optic Patch Cord
ST/APC Single-mode 3.0mm Fiber Optic Patch Cord
ST/PC Multi-mode 3.0mm Fiber Optic Patch Cord

Read More